聚四氟乙烯薄膜在制作的時候怎么選材
發布時間:2017/11/16 9:41:45 來源: 瀏覽次數:
摘要:聚四氟乙烯薄膜第一、選材。聚四氟乙烯膠帶的用料非常重要,良好的選材是至關重要的。目前,KCC黏膠和道康寧有機硅壓敏膠是大部分廠家選用的
上一篇我們送上的文章是聚四氟乙烯薄膜的溶解參數為了更加全面的介紹聚四氟乙烯的各項性能、規格、參數等等,我們將持續發布最新知識,幫助大家了解更多的信息。
聚四氟乙烯薄膜制造具有珍珠母強度的材料在下一篇繼續做詳細介紹,如需了解更多,請持續關注。
本文由聚四氟乙烯薄膜在制作的時候怎么選材生產廠家揚中東旭高分子材料有限公司于2017/11/16 9:41:45整理發布。
轉載請注明出處:http://saswqeq.com/news/jusifuyixi-4367.html。
上一篇:聚四氟乙烯薄膜的溶解參數聚四氟乙烯薄膜第一、選材。聚四氟乙烯膠帶的用料非常重要,良好的選材是至關重要的。目前,KCC黏膠和道康寧有機硅壓敏膠是大部分廠家選用的,他們之間有著很多區別,這就要我們廠家在生產的時候需要重點考慮的問題。道康寧有機硅壓敏膠的耐溫性非常好,但是也有其缺陷性,其粘性往往不是十分理想,而KCC初粘性比道康寧的要好一點。為了提高聚四氟乙烯膠帶,耐高溫性和初粘性,我們往往把兩種有機硅壓敏膠做適當的混合。經過多次調解配比,我們已經掌握了既能提高耐高溫型又能提高初粘性的聚四氟乙烯膠帶。另外,我司還引進了另一種進口的有機硅壓敏膠,具有很強的初粘性和耐高溫性,經過多次測試,效果非常好。
PTFE film first, material selection. PTFE tape material is very important, good material selection is essential. At present, KCC viscose and Dow Corning silicone pressure sensitive adhesive is used most of the manufacturers, there are many differences between them, this is our time in the production of the manufacturers need to focus on the issue. Dow Corning silicone pressure-sensitive adhesive temperature resistance is very good, but also has its defects, the initial viscosity is often not ideal, while the KCC tack a bit better than the Dow corning. In order to improve the high temperature resistance and initial adhesion of PTFE tapes, we often mix two kinds of silicone pressure sensitive adhesives properly. After several mediation ratio, we have mastered both the high temperature resistance and can improve the initial viscosity of PTFE tape. In addition, our company introduced another kind of imported silicone pressure-sensitive adhesive, which has strong initial viscosity and high
聚四氟乙烯薄膜第二、生產。生產工藝是產品質量的至關一步。我們要不斷的優化工藝,不斷的調節粘性,大幅度改善膠帶成品的粘性,為此,我們控制好多種工藝參數,經過幾年的實踐,聚四氟乙烯膠帶的粘性遠遠的得到了提高。聚四氟乙烯薄膜第三、使用。好的聚四氟乙烯膠帶也需要非常好的使用方法。在使用鐵氟龍膠帶之前,我們要求客戶首先要清除被貼表面的油污、雜質以及其它灰塵。還有,用了剩余的聚四氟乙烯膠帶,我們要用塑料紙密封保存,否則,放在空氣中,粘性會
下降。第四、保存。保存聚四氟乙烯膠帶是一個很科學的問題。聚四氟乙烯膠帶是不易露天存放在空氣中太久的時間的。我們車間往往是露天存放的,但是置換快,一般一批貨很快就會賣掉,而中斷用戶就要根據自己的實際情況做決定了。由于一般用戶缺乏足夠的保存環境,我們建議用戶購買的時候庫存保持1-2個月就好了。
temperature resistance. After many tests, the effect is very good.PTFE film second, production. Production process is a crucial tep in product quality. We have to constantly optimize the process, constantly adjust the viscosity, greatly improve the viscosity of adhesive tape products, therefore, we control a variety of process parameters, after several years of practice, the viscosity of PTFE tape has been greatly improved.PTFE film third, use. Good Teflon tape also requires a very good method of use. Before the use of Teflon tape, we require customers to be posted first to clear the surface oil, dust and other impurities. Also, with the remaining PTFE tape, we need to use plastic paper sealed storage, otherwise, put in the air, sticky willDescent. Fourth, save. It's a very scientific question to preserve Teflon tape. Teflon tape is not easy to open storage in the air too long. Our workshop is often open storage, but replacement fast, usually a lot of goods will soon sell, and the interruption of users will be based on their own actual situation to make a decision.Since the average user lacks sufficient storage environment, we recommend that the user keep the stock for 1-2 months at the time of purchase.
聚四氟乙烯薄膜制造具有珍珠母強度的材料在下一篇繼續做詳細介紹,如需了解更多,請持續關注。
本文由聚四氟乙烯薄膜在制作的時候怎么選材生產廠家揚中東旭高分子材料有限公司于2017/11/16 9:41:45整理發布。
轉載請注明出處:http://saswqeq.com/news/jusifuyixi-4367.html。
下一篇:聚四氟乙烯薄膜制造具有珍珠母強度的材料
相關新聞
- 聚四氟乙烯薄膜按工藝要求需要加入什么2018-08-20
- 聚四氟乙烯薄膜需要經過化學處理嗎2018-08-09
- 聚四氟乙烯薄膜都有什么缺點2018-08-07
- 聚四氟乙烯薄膜服裝膜和聚四氟乙烯薄膜空氣過濾膜有什么區別2018-07-02
- 聚四氟乙烯薄膜生產工藝都有什么區別2018-06-26
- 聚四氟乙烯薄膜能緊密地包覆都有什么特性2018-06-25
- 聚四氟乙烯薄膜生產都是什么配方2018-06-20
- 聚四氟乙烯薄膜主要是是怎么制成的2018-06-20
相關產品